ConcreteCalculatorHQ

Tons to Cubic Yards Calculator

Type the tons, tap the material, read the cubic yards. Flip the switch to go from yards to tons.

By Marcus Delgado, concrete estimator · Updated October 2026

What material?
10 tons of gravel =
7.14cubic yards

1 cubic yard ≈ 1.4 tons (2,800 lb). Metric: 5.46 m³ ≈ 9.07 tonnes.

Same amount, other materials
  • Crushed stone7.41 yd³
  • #57 stone7.41 yd³
  • Crusher run (loose)7.14 yd³
  • Crusher run (compacted)5.38 yd³
  • Crushed limestone7.69 yd³
  • Pea gravel7.41 yd³
Quick answerCubic yards = tons ÷ tons per cubic yard. Gravel and crushed stone weigh about 1.35–1.4 tons per yard, so 1 ton ≈ 0.7 cubic yards and 10 tons ≈ 7 cubic yards. Lighter materials like topsoil give more yards per ton; compacted crusher run and concrete give fewer.

The formula

Formula
Cubic yards = Tons ÷ Density (tons/yd³)
Tons = Cubic yards × Density (tons/yd³)

Example: 15 tons of #57 stone at 1.35 tons per yard is 15 ÷ 1.35 = 11.1 cubic yards. If your quarry quotes density in pounds per cubic foot, multiply by 27 and divide by 2,000 to get tons per yard (100 lb/ft³ = 1.35 tons/yd³).

Tons to cubic yards chart

Conversion by material
MaterialTons per yd³Yd³ per ton10 tons =
Gravel1.40.717.1 yd³
Crushed stone1.350.747.4 yd³
#57 stone1.350.747.4 yd³
Crusher run (loose)1.40.717.1 yd³
Crusher run (compacted)1.860.545.4 yd³
Crushed limestone1.30.777.7 yd³
Pea gravel1.350.747.4 yd³
Sand (dry)1.350.747.4 yd³
Sand (wet)1.620.626.2 yd³
Sand (wet, packed)1.750.575.7 yd³
Topsoil1.10.919.1 yd³
Fill dirt1.20.838.3 yd³
Clay (dry)1.10.919.1 yd³
Asphalt millings1.350.747.4 yd³
Asphalt (compacted)1.960.515.1 yd³
Concrete (fresh)20.55 yd³

Planning values from quarry, DOT, and federal tables (see sources). Moisture and gradation change real loads by 10% or more.

Weight of one cubic yard
  • Gravel1.4 t · 2,800 lb
  • Crushed stone1.35 t · 2,700 lb
  • #57 stone1.35 t · 2,700 lb
  • Crusher run (loose)1.4 t · 2,800 lb
  • Crusher run (compacted)1.86 t · 3,720 lb
  • Crushed limestone1.3 t · 2,600 lb
  • Pea gravel1.35 t · 2,700 lb
  • Sand (dry)1.35 t · 2,700 lb
  • Sand (wet)1.62 t · 3,240 lb
  • Sand (wet, packed)1.75 t · 3,500 lb
  • Topsoil1.1 t · 2,200 lb
  • Fill dirt1.2 t · 2,400 lb
  • Clay (dry)1.1 t · 2,200 lb
  • Asphalt millings1.35 t · 2,700 lb
  • Asphalt (compacted)1.96 t · 3,920 lb
  • Concrete (fresh)2 t · 4,000 lb

Why one ton fills different volumes

A ton is a weight; a cubic yard is a space. How much space a ton takes depends on how heavy the material is and how much air is in the pile.

  • Rock type: trap rock is heavier than limestone, so a ton of it is a smaller pile.
  • Loose vs compacted: crusher run is about 1.4 tons per yard in the truck and about 1.86 once it's rolled flat. Ask which one your supplier means.
  • Water: wet sand weighs about 20% more per yard than dry. You pay for the water when you buy by the ton.
Loaded tandem dump truck full of crushed stone on a quarry truck scale with a red digital weight display
Quarries sell by weight. The truck crosses the scale loaded, and its empty weight is subtracted to get the tons on your ticket.

US tons, metric tonnes, and truckloads

Units
UnitEquals
1 US short ton2,000 lb = 0.907 metric tonnes
1 metric tonne1,000 kg = 2,204.6 lb = 1.102 US tons
1 cubic yard27 cubic feet = 0.765 cubic meters

NIST approximate conversions.

How much a dump truck carries
TruckPayloadGravel at 1.4 t/yd³
Pickup / small dump1–5 tons0.7–3.6 yd³
Single-axle6–8 tons4.3–5.7 yd³
Tandem (10-wheeler)12–18 tons8.6–12.9 yd³
Tri-axle18–25 tons12.9–17.9 yd³

Payloads from HomeGuide 2026. Local weight limits and the hauler's truck decide the real load.

A landscape supplier shows how they figure cubic yards for bulk orders.

Frequently asked questions

How many cubic yards are in a ton?

It depends on the material. One ton of gravel or crushed stone is about 0.7 to 0.75 cubic yards. One ton of topsoil is about 0.9 cubic yards. One ton of compacted crusher run is only about 0.54 cubic yards.

Is 20 tons the same as 20 yards?

No. 20 tons of gravel is about 14 to 15 cubic yards. Most stone, sand, and soil weighs more than 1 ton per cubic yard, so a ton always fills less than a yard.

How many yards is 10 tons of gravel?

About 7.1 cubic yards at 1.4 tons per yard. For crushed stone at 1.35 tons per yard, it's about 7.4 cubic yards.

How many tons is 10 cubic yards?

About 14 tons of gravel, 13.5 tons of dry sand or crushed stone, 11 tons of topsoil, or 20 tons of fresh concrete.

How many pounds are in a ton?

A US (short) ton is 2,000 lb. A metric tonne is 1,000 kg, about 2,205 lb. A UK long ton is 2,240 lb. US quarries and landscape yards sell by the short ton.

How many cubic feet are in a cubic yard?

27. A cubic yard is 3 ft × 3 ft × 3 ft. It's also about 0.765 cubic meters.

Estimate by area instead

Know the length, width, and depth instead of the tons? These calculators do the whole job:

Sources we checked