ConcreteCalculatorHQ

Crushed Stone Estimator

Enter length, width, and depth. See how many tons and cubic yards of crushed stone to order.

Your measurements

Area shape

After compaction, not before.

Material & extra allowance

Use supplier density for the matching material state. Defaults are planning assumptions.

Price & delivery

USD. No assumed prices, taxes, labor, or supplier minimums.

Truckloads & coverage
Crushed stone layerNot to scale
20 ft x 10 ft / 4 in
Plan to order
3.5US tons

Includes 5% extra.

Finished depth: 4 in. Finished density: 100 lb/ft³. Loose delivery density: 100 lb/ft³.

Area
200 sq ft
Loose delivery estimate
2.59 yd³
Finished volume before extra
2.47 yd³
Truckloads at 18 US tons/load
1 load
The calculation

200 sq ft × 4 in = 2.469 yd³ before extra.

With 5% extra: 2.593 yd³ in the finished state.

At 100 lb/ft³: 3.5 US tons.

Same mass ÷ loose density (100 lb/ft³) = 2.593 yd³ for delivery.

Quantity estimate only. Confirm density, product suitability, order size, and delivery fees with your supplier.

Which crushed stone do you need?

The number on the stone is its size, not its rock type. #57 can be limestone, granite, or trap rock. Pick by job first:

Common crushed stone sizes, drawn to scale
Screenings3/16 in to dust#83/8 in#571 in to 3/16 inCrusher run1½ in to dust#41½ in to 3/4 in#32 in to 1 in0"1"2"

Drawn to the same scale. Dots show the stone dust (fines) mixed into blended products.

Crushed stone sizes and what they're for
StoneSizeDrains?Best forTons per yd³
#3 / #42–1 in / 1½–¾ inYesDriveway base layer, culvert bedding≈ 1.35
#571 in to 3/16 inYesFrench drains, under slabs, driveway middle layer≈ 1.35
#83/8 inYesPaver joints, chips, small drainage jobs≈ 1.35
Crusher run1½ in to dustNoDriveway top, shed pads, paver and patio base≈ 1.86 compacted
Screenings3/16 in to dustNoLeveling, filling gaps in base, walkways≈ 1.53 compacted

Sizes from the ASTM D448 / AASHTO M 43 chart published by New Enterprise Stone & Lime. Densities from Vulcan Materials and WisDOT.

Tandem dump truck unloading gray crushed stone onto a tarp beside a staked-out driveway with a rake and wheelbarrow
A tandem dump truck carries 12–18 tons. Have it dump on a tarp right next to the work to save wheelbarrow trips.

How far does one ton go?

Coverage of 1 US ton
DepthClean stone (1.35 t/yd³)Crusher run, compacted (1.86 t/yd³)
2 in120 sq ft87 sq ft
3 in80 sq ft58 sq ft
4 in60 sq ft43 sq ft
6 in40 sq ft29 sq ft

Before any extra allowance. One cubic yard covers 324 sq ft at 1 inch, 81 sq ft at 4 inches.

Why quarries quote different tons per yard

You'll see anything from 1.2 to 1.9 tons per cubic yard online. They're all "right" for something. Clean stone is about one-third air and barely compacts. Crusher run has dust that fills those gaps, so a compacted yard weighs about 40% more than a loose one.

Tons per cubic yard
  • Clean #57 stone1.30–1.40
  • Crusher run, loose1.35–1.40
  • Screenings, compacted≈ 1.53
  • Crusher run, compacted1.80–1.90

Vulcan Materials, FEMA appeal 1930-DR-IA, Ohio DOT Item 411, and WisDOT report 0092-22-05.

If you multiply compacted yards of crusher run by a loose 1.4 tons per yard, you'll order about 25% short. This estimator uses compacted density for tons and loose density for the truck volume, so that mistake can't happen.

Truckloads and prices

Dump truck sizes
TruckCubic yardsPayload
Single-axle5–8 yd³6–8 tons
Tandem (10-wheeler)10–14 yd³12–18 tons
Tri-axle12–16 yd³18–25 tons

HomeGuide 2026. Set your hauler's capacity under Truckloads & coverage in the estimator.

National 2026 averages from HomeGuide: crushed stone and gravel $10–$50 per ton; #57-type drainage stone $25–$50; crusher run $24–$34 delivered; crushed limestone $30–$38. Delivery runs about $10–$25 per ton, and many quarries deliver free above a 5-ton minimum nearby. Picking up yourself is cheapest: one South Carolina county quarry lists #57 at $23.50 a ton (August 2026).

A real 20-ton delivery, start to finish. Watch how far one load actually spreads.

Related guides

How to use this calculator

  1. 1. Enter measurements
    Choose the area shape and enter its dimensions.
  2. 2. Enter depth
    Use the finished depth specified for your project.
  3. 3. Review the estimate
    Confirm the quantity and order details with your supplier.

Quick checks

Use supplier data
Replace the default density and price when you have a quote.
Check the order
Allow for site waste and supplier minimums before buying.